Key Cutting Near Me: Prices & Same-Day Service in Newcastle
Key cutting in Newcastle costs from around £4 for a standard cylinder key duplicated from one you already have, and from around £10 for a high security key when you can give us the key's code. Most keys are cut while you wait, in a few minutes, at our shop on West Road. If you're searching for "key cutting near me" and want it done today, that's the short answer.
Here at NLS Security Ltd we've been cutting keys in Newcastle for over 40 years, and we cut for homes, landlords, offices and car owners across the North East. Call 0191 238 6000 if you want to check we can do yours before you set off.
What key cutting costs in Newcastle
Prices vary with the type of key, the blank it needs and whether you have the original to copy from. As a guide:
- Standard cylinder key (Yale type, uPVC door key): from around £4 when you bring a key to duplicate.
- Mortice and older internal keys: typically £5 to £12, depending on the blank.
- High security keys (anti-snap cylinders, restricted profiles): from around £10 when you have the key's code or card.
- Padlock and cabinet keys: usually £4 to £8.
- Car keys: cutting the blade is one thing, but a modern car key also needs programming to the immobiliser. That's a separate job with its own price, covered in our car key replacement cost guide.
Get a quote for your specific key before you travel if the price matters to you. It takes a minute on the phone and saves a wasted trip.
How long does it take?
A standard cylinder or mortice key is cut in a few minutes, so most people are in and out within ten. High security and coded keys take a little longer because the blank has to be matched properly to the profile, and we might need to order a blank in if it's an unusual one. Bring the key to us and we'll tell you there and then.
Can you cut a key without the original?
Sometimes, and it depends on the lock. If it's a high security cylinder with a code card, we can cut a new key from the code without a sample. If it's a standard key and you've lost the only one, cutting isn't the answer: the lock needs opening and often replacing, which is a locksmith job rather than a key cutting job. Our Newcastle locksmith cost guide covers what that involves. For a lost house key specifically, our locked out of house guide walks through the first steps.
Why the cheap kiosk in a supermarket isn't always cheaper
Automated key machines in shops are fine for a basic brass cylinder key. Where they come unstuck is on anything with a security profile. Restricted and patented keys need the right blank and, on some systems, the code from the card, and a machine that "sort of" copies one can leave you with a key that works stiffly, wears the lock out or fails on the doorstep in the rain. If your key has a card, a code or a name stamped on it, bring it to a locksmith rather than a kiosk.
What to bring with you
- The key you want copying, if you have it.
- The key's code card or security card, for high security and restricted keys.
- Proof that you're entitled to the key if it's for a rented property or a business, such as a tenancy agreement or a letter on company paper. Landlords and letting agents ask us for this routinely.
We're Master Locksmith Association accredited (membership number 00398 ), DBS checked and insurance compliant, so your keys and your address stay between us.
Keys we cut every week
Most of what comes through the door is ordinary and quick: front door cylinder keys, back door keys, window keys, padlock keys, filing cabinet keys, and spares for a rental property. Alongside that we cut for uPVC doors, mortice locks, and high security cylinders where the key is restricted to a code. If you're not sure what you've got, bring it in and we'll tell you what it is, what it costs and how long it takes. There's no charge for looking.
One thing we can't do is cut a key from a photograph or a description. The cut has to match the lock to within a fraction of a millimetre, so we need either the original key or the code card.
Where to find us
Fort House, 173 West Road, Newcastle upon Tyne NE15 6PQ. Free parking on site, and we're a short drive from the A1 and A69, which makes it easy if you're coming from Gateshead, North Shields, Hebburn or out towards Hexham. You can also see our full key cutting service page for what we cover, or ask about auto keys for your car.
Our advice: cut the spare before you need it
The cheapest key is the one you copy while you still have an original. If you're down to one front door key, get a spare cut this week. It's a few pounds now against an emergency callout later, and it's the difference between a five-minute job and a locksmith visit at ten at night.
Frequently asked questions
How much does key cutting cost near me?
In Newcastle, a standard cylinder key is from around £4 when you have one to copy, and high security keys start around £10 with the code. Prices vary by blank and key type, so call with the key in front of you for an exact price.
Can I get a key cut the same day?
Yes, for most standard keys. We cut while you wait at our West Road shop. Unusual blanks or coded keys may need ordering, which usually takes a day or two.
Do I need ID to get a key cut?
Not for a straight copy of a key you've brought in. For restricted keys, code cards and anything for a rented property or business, we'll ask for proof that you're entitled to it. That protects you as much as the property.
How many spare keys should I have?
One spare per door is the sensible minimum, kept somewhere other than the key ring you carry. If you have a lodger, cleaner or carer, cut them their own key rather than lending yours.
Can you cut a key for a uPVC door?
Yes. Most uPVC doors use a euro cylinder, and we carry blanks for common profiles. If yours is a high security cylinder with an anti-snap rating, we cut to the correct restricted blank so the lock keeps its rating.
Do you cut keys for shops and offices?
Yes, including master key systems where one key opens several doors and others only open one. If you're setting up for staff or a building with multiple tenants, ask about a master key plan rather than a drawer full of loose keys.
Need a key cut today? Call NLS Security Ltd on 0191 238 6000 or bring it to Fort House, 173 West Road, Newcastle upon Tyne NE15 6PQ. Most keys are done while you wait.













